XCMG 68m Aerial Platform Fire Fighting Truck DG68
DG68 Aerial Platform Fire Truck is an electric control hydraulic drive, full slewing and combined boom type giant multi-purpose vehicle.
Operational height of DG68 Aerial Platform Fire Truck is up to 68m, the rated working depth is 13.73m, rated load of platform is 400kg, max. working range is 23m, and BENS five-bridge chassis for ultra low driver's cab is adopted, weight of the vehicle is 48t. The outrigger is two-echelon telescopic type, and the boom adopts Level-2 telescopic boom (four Level-1 booms and three Level-2 booms) combination, with a total of 7 joints.
CANBUS-based variable pump constant pressure control system is adopted for the control system, with application of servo proportional control, PLC integrated control, multimedia dynamic display and various other advanced technologies, which ensures the stability of boom movement as well as good micro mobility. The vehicle has 25 safety protection devices, which forms a perfect multi-layer protection system and intelligent fault diagnosis system.
DG68 Aerial Platform Fire Truck integrates functions of high altitude fire fighting as well as people saving and property rescuing. It has wide working r, strong fire rescue ability and good maneuverability, the excellent operational performance is widely applicable to high-level, super-level fire rescue operations in the city.
1. Efficient fire fighting capacity
Rated working height is 68m, rated working depth is 13.73m, rated load of platform is 400kg, max. working radius is up to 23m, rated flow of monitor is 50L/S, stroke ≥ 70m, the elevation angle of water monitor can reach 360°, the operation time of whole vehicle ≤ 200s.
2. Intelligent traveling with high mobility
5-axle special chassis for ultra low driver's cab is adopted in this vehicle, two axles for driving and three axles for steering, where the fifth axle is air suspension and attached with steering, small turning radius, large load bearing capacity, powerful and flexible, and CAN bus control technology, ABS system, automatic transmission, intelligent cruise, intelligent maintenance and service system and other advanced functions are available.
3. Complete safety protection system
The design of DG68 Aerial Platform Fire Truck follows two principles: 1) Principle of combining redundant design and simplified design. 2) Design principle of failure insurance.
In control architecture design, firstly computer technology, combination of mechanical and electronic and other technical means are adopted to avoid overload and over-radius operation so as to eliminate the existing of danger fundamentally; secondly logic interlocking, safety control and other design means are applied to enable the vehicle have automatic misoperation prevention capability; thirdly complete acoustic, optical and electric multimedia alarm channels are set to alert the operator current status dynamically in real-time. Just based on 25 items of control devices with safety different and different ways, this vehicle has multiple protection systems and a complete highly reliable system.
[Product Parameter]
I. Main technical data in travel configuration
| Type |
Items |
Unit |
Parameters |
| Dimension parameters |
Overall length of whole machine |
mm |
15060 |
| Overall height of whole machine |
mm |
4000 |
| Overall width of whole machine |
mm |
2500 |
| Axle distance |
Axle 1-Axle 2 |
mm |
1700 |
| Axle 2-Axle 3 |
mm |
3400 |
| Axle 2-Axle 3 |
mm |
1350 |
| Axle 2-Axle 3 |
mm |
1350 |
| Quality parameters |
Curb weight |
48050 |
Axle load of Axle 1 and 2 |
kg |
16000 |
| Axle load of Axle 3 and 4 |
kg |
24700 |
| Axle load of Axle 5 |
kg |
7350 |
| Full mass |
48200 |
Axle load of Axle 1 and 2 |
kg |
16240 |
| Axle load of Axle 3 and 4 |
kg |
24620 |
| Axle load of Axle 5 |
kg |
7340 |
| Power parameters |
Engine type |
|
OM501LA.III/17 |
| Engine power/speed |
kw/r/min |
300kw/1800rpm |
| Driving parameters |
Max. vehicle speed |
Km/h |
≥85 |
| Min. turning diameter |
m |
≤24 |
| Approach angle |
° |
9 |
| Departure angle |
° |
9 |
| Braking distance (vehicle speed 30km/h) |
m |
≤9.5 |
| Min. ground clearance |
mm |
331 |
| Max. gradient |
% |
≥25% |
II. Main technical data for operation
| Category |
Item |
Unit |
Parameter |
| Main performance |
Rated working height |
m |
68 |
| Max. working radius |
m |
23 |
| Max. down reach |
m |
13.2 |
| Platform rated load |
kg |
400 |
| Outrigger span (longitudinal lateral) |
m |
7.635×7.0 |
| Elevating range of No.1 boom |
° |
1~84 |
| Elevating range of No.2 boom |
° |
-74~74 |
| Speed |
Time for deploying boom |
s |
≤200 |
| Time for deploying outriggers |
s |
≤30 |
| Fire fighting performance |
Fire monitor |
Rated flow |
L/s |
50 |
| Rated pressure |
MPa |
0.8 |
| Rated reach |
m |
≥70 |
| Monitor travel |
° |
Below/above horizontal: -45~90
Leftwards/ rightwards: ±90 |
[Product Picture]
[Company Information]
[FAQ]
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted.
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC.
3: What about the delivery time?
A: 7-30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs.
Audited Supplier 
){kind=link}
){kind=link}